# Help Needed: CrowdSec Configuration Error

**URL:** <https://discourse.crowdsec.net/t/help-needed-crowdsec-configuration-error/1944>\
**Category:** Uncategorized\
**Created:** [July 29, 2024, 6:27am UTC](https://discourse.crowdsec.net/t/help-needed-crowdsec-configuration-error/1944 "2024-07-29T06:27:57Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![addisonbell](https://dub1.discourse-cdn.com/flex013/user_avatar/discourse.crowdsec.net/addisonbell/32/935_2.png) [@addisonbell](https://discourse.crowdsec.net/u/addisonbell)\
**Post date:** [July 29, 2024, 6:27am UTC](https://discourse.crowdsec.net/t/help-needed-crowdsec-configuration-error/1944/1 "2024-07-29T06:27:57Z")

</div>

Hey everyone,

I hope you’re all doing great!

I’ve been having some trouble with my CrowdSec setup and was hoping someone might be able to lend a hand. I’m encountering a **CrowdSec Configuration Error** that’s been a bit of a headache. I’ve double-checked my configuration file, but it seems like something’s not quite right.

Here’s a brief overview of the issue:

- **Error Message** : `Error: Configuration file not found or malformed. Please check the syntax and file path.`
- **Configuration File** : I’m using the default configuration with a few tweaks, such as custom log file paths and adjusted rate limits. Here’s a snippet of my config:

```auto
crowdsec:
  log_file: /var/log/crowdsec.log
  api_key: my_secret_api_key
  alerts:
    - alert_level: high
      threshold: 10

```

I have been through resources [CrowdSec Configuration | CrowdSec](https://docs.crowdsec.net/docs/configuration/crowdsec_configuration/) [how to get ccsp certification](https://www.igmguru.com/blog/how-to-get-ccsp-certification/) and as per them I have tried the following-

I’ve restarted the CrowdSec service, checked the file permissions, and verified the log paths. I also ran `crowdsec -config-check` to validate the configuration, but the error persists. But didn’t get success.

Has anyone else run into a similar problem or have any ideas on what might be going wrong? Any suggestions or guidance would be really appreciated!

Thanks in advance for your help!

Best Regards

---

<div class="post-metadata">

**Author:** ![iiAmLoz](https://dub1.discourse-cdn.com/flex013/user_avatar/discourse.crowdsec.net/iiamloz/32/386_2.png) [@iiAmLoz](https://discourse.crowdsec.net/u/iiAmLoz)\
**Post date:** [July 29, 2024, 8:03am UTC](https://discourse.crowdsec.net/t/help-needed-crowdsec-configuration-error/1944/2 "2024-07-29T08:03:00Z")

</div>

> [@addisonbell](#):
>
> ```auto
> crowdsec:
> log_file: /var/log/crowdsec.log
> api_key: my_secret_api_key
> alerts:
> - alert_level: high
> threshold: 10
> 
> ```

All of this configuration doesn’t exist in the documentation that you linked? Where did you see this as this is not an actual configuration this is the error.
