# CAPI and APP/CONSOLE and upgrade v1.1.1 to v1.2.0

**URL:** <https://discourse.crowdsec.net/t/capi-and-app-console-and-upgrade-v1-1-1-to-v1-2-0/278>\
**Category:** Uncategorized\
**Created:** [September 20, 2021, 7:43am UTC](https://discourse.crowdsec.net/t/capi-and-app-console-and-upgrade-v1-1-1-to-v1-2-0/278 "2021-09-20T07:43:52Z")\
**Posts on this page:** 19\
**Page:** 1

<div class="post-metadata">

**Author:** ![Gandalf](https://dub1.discourse-cdn.com/flex013/user_avatar/discourse.crowdsec.net/gandalf/32/43_2.png) [@Gandalf](https://discourse.crowdsec.net/u/Gandalf)\
**Post date:** [September 20, 2021, 7:43am UTC](https://discourse.crowdsec.net/t/capi-and-app-console-and-upgrade-v1-1-1-to-v1-2-0/278/1 "2021-09-20T07:43:52Z")

</div>

Question : If using WebConsole with a registered instance, how can I update/upgrade my Crowdsec instance without any lost of statistics ?  
How can I re-register to same instance ID ?

Do I need to remove the CAPI register and do it only if never did ?

```auto
cscli -c /etc/crowdsec/config.yaml capi register

```

Did my local machine-id will be used ?

In the OpenWrt Package, I execute this commands at post-install (first install but also update / upgrade…) :

```auto
cscli -c /etc/crowdsec/config.yaml machines add --force "$(cat /var/lib/dbus/machine-id)" -a -f /etc/crowdsec/local_api_credentials.yaml
cscli -c /etc/crowdsec/config.yaml capi register
cscli hub update && cscli collections install crowdsecurity/linux && cscli parsers install crowdsecurity/whitelists

```

Must (and can) I do it better ?  
Thanks in advance…

---

<div class="post-metadata">

**Author:** ![alteredCoder](https://dub1.discourse-cdn.com/flex013/user_avatar/discourse.crowdsec.net/alteredcoder/32/44_2.png) [@alteredCoder](https://discourse.crowdsec.net/u/alteredCoder)\
**Post date:** [September 20, 2021, 10:03am UTC](https://discourse.crowdsec.net/t/capi-and-app-console-and-upgrade-v1-1-1-to-v1-2-0/278/2 "2021-09-20T10:03:46Z")

</div>

Hello @Gandalf,

> Do I need to remove the CAPI register and do it only if never did ?

Yes, this command must be run only one time (at the installation) and shouldn’t be run when upgrading the package.

If you can don’t run the `cscli capi register` at upgrade it would be great 🙂

---

<div class="post-metadata">

**Author:** ![Gandalf](https://dub1.discourse-cdn.com/flex013/user_avatar/discourse.crowdsec.net/gandalf/32/43_2.png) [@Gandalf](https://discourse.crowdsec.net/u/Gandalf)\
**Post date:** [September 20, 2021, 10:49am UTC](https://discourse.crowdsec.net/t/capi-and-app-console-and-upgrade-v1-1-1-to-v1-2-0/278/3 "2021-09-20T10:49:23Z")

</div>

Thanks…

I will change my script to :

```auto
[-s /etc/crowdsec/online_api_credentials.yaml] || cscli -c /etc/crowdsec/config.yaml capi register -f /etc/crowdsec/online_api_credentials.yaml

```

The command will execute only if the online\_api\_credentials.yaml is empty, which is the case of first installation !

---

<div class="post-metadata">

**Author:** ![alteredCoder](https://dub1.discourse-cdn.com/flex013/user_avatar/discourse.crowdsec.net/alteredcoder/32/44_2.png) [@alteredCoder](https://discourse.crowdsec.net/u/alteredCoder)\
**Post date:** [September 20, 2021, 12:48pm UTC](https://discourse.crowdsec.net/t/capi-and-app-console-and-upgrade-v1-1-1-to-v1-2-0/278/4 "2021-09-20T12:48:18Z")

</div>

Yes this should be good, perfect 🙂

---

<div class="post-metadata">

**Author:** ![Gandalf](https://dub1.discourse-cdn.com/flex013/user_avatar/discourse.crowdsec.net/gandalf/32/43_2.png) [@Gandalf](https://discourse.crowdsec.net/u/Gandalf)\
**Post date:** [September 20, 2021, 1:18pm UTC](https://discourse.crowdsec.net/t/capi-and-app-console-and-upgrade-v1-1-1-to-v1-2-0/278/5 "2021-09-20T13:18:38Z")

</div>

Done an upgrade to 1.2.0 on my main routeur :  
got this now :

```auto
root@LPM:~/custom/1.2.0# cscli machines list
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 NAME IP ADDRESS LAST UPDATE STATUS VERSION                                                                
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 5244e15d7908402192135ac72b4acb10yqGbFd9bcN233Mpf 10.4.2.16 2021-09-20T05:26:59+02:00 ✔️ v1.1.1-debian-pragmatic-linux-73e0bbaf93070f4a640eb5a22212b5dcf26699de 
 2f827bc3cfb84cb0b1e59a5ae3f1492dIdIeA8T6UWmvJqhV 10.4.2.159 2021-08-16T15:33:13+02:00 ✔️ v1.1.1-debian-pragmatic-linux-73e0bbaf93070f4a640eb5a22212b5dcf26699de 
 fd738d07d6d54d8ca63b14fba8078980fy4ABpU4hSONMAyO 127.0.0.1 2021-09-20T02:15:01+02:00 ✔️ v1.1.1-openwrt-73e0bbaf93070f4a640eb5a22212b5dcf26699de                
                                                   127.0.0.1 2021-09-20T15:02:45+02:00 ✔️ v1.2.0-openwrt-openwrt                                                 
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------

```

---

<div class="post-metadata">

**Author:** ![Gandalf](https://dub1.discourse-cdn.com/flex013/user_avatar/discourse.crowdsec.net/gandalf/32/43_2.png) [@Gandalf](https://discourse.crowdsec.net/u/Gandalf)\
**Post date:** [September 20, 2021, 1:30pm UTC](https://discourse.crowdsec.net/t/capi-and-app-console-and-upgrade-v1-1-1-to-v1-2-0/278/6 "2021-09-20T13:30:45Z")

</div>

oups… bug on OpenWrt 19.07.x not machine-id file !  
`cat /var/lib/dbus/machine-id` (return nothing)…  
only correct since 21.02.x !

---

<div class="post-metadata">

**Author:** ![Gandalf](https://dub1.discourse-cdn.com/flex013/user_avatar/discourse.crowdsec.net/gandalf/32/43_2.png) [@Gandalf](https://discourse.crowdsec.net/u/Gandalf)\
**Post date:** [September 20, 2021, 1:40pm UTC](https://discourse.crowdsec.net/t/capi-and-app-console-and-upgrade-v1-1-1-to-v1-2-0/278/7 "2021-09-20T13:40:00Z")

</div>

I did some cleanup (empty id machine and re-register of the new software with same id as before) !  
May be this was a mistake to re-register ?

```auto
root@LPM:~/custom/1.2.0# cscli machines list
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 NAME IP ADDRESS LAST UPDATE STATUS VERSION                                                                
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 5244e15d7908402192135ac72b4acb10yqGbFd9bcN233Mpf 10.4.2.16 2021-09-20T05:26:59+02:00 ✔️ v1.1.1-debian-pragmatic-linux-73e0bbaf93070f4a640eb5a22212b5dcf26699de 
 2f827bc3cfb84cb0b1e59a5ae3f1492dIdIeA8T6UWmvJqhV 10.4.2.159 2021-08-16T15:33:13+02:00 ✔️ v1.1.1-debian-pragmatic-linux-73e0bbaf93070f4a640eb5a22212b5dcf26699de 
 fd738d07d6d54d8ca63b14fba8078980fy4ABpU4hSONMAyO 127.0.0.1 2021-09-20T15:32:27+02:00 ✔️ v1.2.0-openwrt-openwrt                                                 
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------

```

Logs show me now an error :  
`time="20-09-2021 15:32:25" level=error msg="Failed to notify(sent: false): <nil>"`

```auto
time="20-09-2021 15:32:14" level=warning msg="SIGTERM received, shutting down"
time="20-09-2021 15:32:14" level=info msg="Crowdsec engine shutting down"
time="20-09-2021 15:32:14" level=info msg="Killing parser routines"
time="20-09-2021 15:32:15" level=info msg="Bucket routine exiting"
time="20-09-2021 15:32:16" level=info msg="killing all plugins"
time="20-09-2021 15:32:16" level=info msg="serve: shutting down api server"
time="20-09-2021 15:32:16" level=info msg="push tomb is dying, sending cache (0 elements) before exiting"
time="20-09-2021 15:32:16" level=warning msg="Crowdsec service shutting down"
time="20-09-2021 15:32:16" level=info msg="Crowdsec v1.2.0-openwrt-openwrt"
time="20-09-2021 15:32:16" level=info msg="Loading prometheus collectors"
time="20-09-2021 15:32:16" level=info msg="Loading CAPI pusher"
time="20-09-2021 15:32:16" level=info msg="start crowdsec api push (interval: 30s)"
time="20-09-2021 15:32:16" level=info msg="start crowdsec api pull (interval: 2h)"
time="20-09-2021 15:32:16" level=info msg="start crowdsec api send metrics (interval: 30m)"
time="20-09-2021 15:32:16" level=info msg="last CAPI pull is newer than 1h30, skip."
time="20-09-2021 15:32:16" level=info msg="Loading grok library /etc/crowdsec/patterns"
time="20-09-2021 15:32:25" level=info msg="Loading enrich plugins"
time="20-09-2021 15:32:25" level=info msg="Successfully registered enricher 'GeoIpCity'"
time="20-09-2021 15:32:25" level=info msg="Successfully registered enricher 'GeoIpASN'"
time="20-09-2021 15:32:25" level=info msg="Successfully registered enricher 'IpToRange'"
time="20-09-2021 15:32:25" level=info msg="Successfully registered enricher 'reverse_dns'"
time="20-09-2021 15:32:25" level=info msg="Successfully registered enricher 'ParseDate'"
time="20-09-2021 15:32:25" level=info msg="Loading parsers 6 stages"
time="20-09-2021 15:32:25" level=info msg="Loaded 2 parser nodes" file=/etc/crowdsec/parsers/s00-raw/syslog-logs.yaml
time="20-09-2021 15:32:25" level=info msg="Loaded 1 parser nodes" file=/etc/crowdsec/parsers/s01-parse/iptables-logs.yaml
time="20-09-2021 15:32:25" level=info msg="Loaded 1 parser nodes" file=/etc/crowdsec/parsers/s01-parse/sshd-logs.yaml
time="20-09-2021 15:32:25" level=info msg="Loaded 1 parser nodes" file=/etc/crowdsec/parsers/s02-enrich/dateparse-enrich.yaml
time="20-09-2021 15:32:25" level=info msg="Loaded 1 parser nodes" file=/etc/crowdsec/parsers/s02-enrich/geoip-enrich.yaml
time="20-09-2021 15:32:25" level=info msg="Loaded 1 parser nodes" file=/etc/crowdsec/parsers/s02-enrich/whitelists.yaml
time="20-09-2021 15:32:25" level=info msg="Loaded 7 nodes, 3 stages"
time="20-09-2021 15:32:25" level=info msg="Loading postoverflow Parsers"
time="20-09-2021 15:32:25" level=info msg="Loaded 0 nodes, 0 stages"
time="20-09-2021 15:32:25" level=info msg="Loading 2 scenario files"
time="20-09-2021 15:32:25" level=info msg="Adding leaky bucket" cfg=silent-fire file=/etc/crowdsec/scenarios/ssh-bf.yaml name=crowdsecurity/ssh-bf
time="20-09-2021 15:32:25" level=info msg="Adding leaky bucket" cfg=solitary-bush file=/etc/crowdsec/scenarios/ssh-bf.yaml name=crowdsecurity/ssh-bf_user-enum
time="20-09-2021 15:32:25" level=info msg="Adding leaky bucket" cfg=twilight-night file=/etc/crowdsec/scenarios/iptables-scan-multi_ports.yaml name=crowdsecurity/iptables-scan-multi_ports
time="20-09-2021 15:32:25" level=warning msg="Loaded 3 scenarios"
time="20-09-2021 15:32:25" level=info msg="loading acquisition file : /etc/crowdsec/acquis.yaml"
time="20-09-2021 15:32:25" level=warning msg="No matching files for pattern /var/log/nginx/*.log" type=file
time="20-09-2021 15:32:25" level=warning msg="No matching files for pattern ./tests/nginx/nginx.log" type=file
time="20-09-2021 15:32:25" level=warning msg="No matching files for pattern /var/log/auth.log" type=file
time="20-09-2021 15:32:25" level=warning msg="No matching files for pattern /var/log/syslog" type=file
time="20-09-2021 15:32:25" level=warning msg="No matching files for pattern /var/log/apache2/*.log" type=file
time="20-09-2021 15:32:25" level=error msg="Failed to notify(sent: false): <nil>"
time="20-09-2021 15:32:25" level=warning msg="Starting processing data"

```

---

<div class="post-metadata">

**Author:** ![Gandalf](https://dub1.discourse-cdn.com/flex013/user_avatar/discourse.crowdsec.net/gandalf/32/43_2.png) [@Gandalf](https://discourse.crowdsec.net/u/Gandalf)\
**Post date:** [September 20, 2021, 2:03pm UTC](https://discourse.crowdsec.net/t/capi-and-app-console-and-upgrade-v1-1-1-to-v1-2-0/278/8 "2021-09-20T14:03:00Z")

</div>

I do not understand how to upgrade from 1.1.1 to 1.2.0 all 3 nodes of my testing platform !  
I have two remote Debian and one central OpenWrt.  
OpenWrt is the main routeur/firewall gateway.  
Debian servers hosts Nginx and NextCloud.

The OpenWrt upgrade may have been problematic because of my postinstall script, where I have redone the main local api register…  
I have a made a backup with `cscli config backup` on it before testing the package.

The Debian are just standard Debian packages which were upgraded via apt !  
But looks like to been no more recognised any more as already validated on central CrowdSec !?

Where and what I do it wrong ?

---

<div class="post-metadata">

**Author:** ![Gandalf](https://dub1.discourse-cdn.com/flex013/user_avatar/discourse.crowdsec.net/gandalf/32/43_2.png) [@Gandalf](https://discourse.crowdsec.net/u/Gandalf)\
**Post date:** [September 20, 2021, 2:39pm UTC](https://discourse.crowdsec.net/t/capi-and-app-console-and-upgrade-v1-1-1-to-v1-2-0/278/9 "2021-09-20T14:39:37Z")

</div>

Checked again the [How to set up a CrowdSec multi-server installation - The open-source & multiplayer security solution](https://crowdsec.net/multi-server-setup/)

I clean the machines list just keeping the localhost (latest registered by faulty multiples `cscli machines add -a`)

redone the (with changing to my own OpenWrt IP !)

```auto
sudo cscli lapi register -u http://10.0.0.1:8080

```

Then OpenWrt seen again the servers :

```auto
root@LPM:~/custom/1.2.0# cscli machines list
-------------------------------------------------------------------------------------------------------------------------
 NAME IP ADDRESS LAST UPDATE STATUS VERSION                
-------------------------------------------------------------------------------------------------------------------------
 db3e872e345f48848d0d85ab5c529947GWkbyXJtyNnJziiS 127.0.0.1 2021-09-20T16:22:51+02:00 ✔️ v1.2.0-openwrt-openwrt 
 5244e15d7908402192135ac72b4acb10Xd83eOd8jss8u3Cs 10.4.2.16 2021-09-20T16:32:33+02:00 🚫                             
 2f827bc3cfb84cb0b1e59a5ae3f1492dLk6Uqo3ipKhWLWjU 10.4.2.159 2021-09-20T16:32:44+02:00 🚫                             
-------------------------------------------------------------------------------------------------------------------------

```

So I validate the two new comers !

```auto
root@LPM:~/custom/1.2.0# cscli machines validate 5244e15d7908402192135ac72b4acb10Xd83eOd8jss8u3Cs
INFO[20-09-2021 04:33:28 PM] machine '5244e15d7908402192135ac72b4acb10Xd83eOd8jss8u3Cs' validated successfuly 
root@LPM:~/custom/1.2.0# cscli machines validate 2f827bc3cfb84cb0b1e59a5ae3f1492dLk6Uqo3ipKhWLWjU
INFO[20-09-2021 04:33:34 PM] machine '2f827bc3cfb84cb0b1e59a5ae3f1492dLk6Uqo3ipKhWLWjU' validated successfuly

```

Restarted the servers crowdsec service…

```auto
root@LPM:~/custom/1.2.0# cscli machines list
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 NAME IP ADDRESS LAST UPDATE STATUS VERSION                                                                
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 db3e872e345f48848d0d85ab5c529947GWkbyXJtyNnJziiS 127.0.0.1 2021-09-20T16:22:51+02:00 ✔️ v1.2.0-openwrt-openwrt                                                 
 5244e15d7908402192135ac72b4acb10Xd83eOd8jss8u3Cs 10.4.2.16 2021-09-20T16:34:22+02:00 ✔️ v1.2.0-debian-pragmatic-linux-0ecfe7568790a15791011da27eb24e96e7d4a39f 
 2f827bc3cfb84cb0b1e59a5ae3f1492dLk6Uqo3ipKhWLWjU 10.4.2.159 2021-09-20T16:34:25+02:00 ✔️ v1.2.0-debian-pragmatic-linux-0ecfe7568790a15791011da27eb24e96e7d4a39f 
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------

```

```auto
root@LPM:~/custom/1.2.0# cscli metrics
INFO[20-09-2021 04:39:16 PM] Local Api Metrics:                           
+----------------------+--------+------+
| ROUTE | METHOD | HITS |
+----------------------+--------+------+
| /v1/alerts | POST | 1 |
| /v1/decisions/stream | GET | 100 |
| /v1/watchers | POST | 2 |
| /v1/watchers/login | POST | 24 |
+----------------------+--------+------+
INFO[20-09-2021 04:39:16 PM] Local Api Machines Metrics:                  
+--------------------------------------------------+------------+--------+------+
| MACHINE | ROUTE | METHOD | HITS |
+--------------------------------------------------+------------+--------+------+
| 5244e15d7908402192135ac72b4acb10Xd83eOd8jss8u3Cs | /v1/alerts | POST | 1 |
+--------------------------------------------------+------------+--------+------+
INFO[20-09-2021 04:39:16 PM] Local Api Bouncers Metrics:                  
+------------------------------+----------------------+--------+------+
| BOUNCER | ROUTE | METHOD | HITS |
+------------------------------+----------------------+--------+------+
| cs-firewall-bouncer-yvYwOGfW | /v1/decisions/stream | GET | 100 |
+------------------------------+----------------------+--------+------+

```

---

<div class="post-metadata">

**Author:** ![Gandalf](https://dub1.discourse-cdn.com/flex013/user_avatar/discourse.crowdsec.net/gandalf/32/43_2.png) [@Gandalf](https://discourse.crowdsec.net/u/Gandalf)\
**Post date:** [September 20, 2021, 2:40pm UTC](https://discourse.crowdsec.net/t/capi-and-app-console-and-upgrade-v1-1-1-to-v1-2-0/278/10 "2021-09-20T14:40:26Z")

</div>

Where and what I have done it wrong ?

---

<div class="post-metadata">

**Author:** ![Gandalf](https://dub1.discourse-cdn.com/flex013/user_avatar/discourse.crowdsec.net/gandalf/32/43_2.png) [@Gandalf](https://discourse.crowdsec.net/u/Gandalf)\
**Post date:** [September 20, 2021, 2:41pm UTC](https://discourse.crowdsec.net/t/capi-and-app-console-and-upgrade-v1-1-1-to-v1-2-0/278/11 "2021-09-20T14:41:19Z")

</div>

> [@Gandalf](#):
>
> `cscli -c /etc/crowdsec/config.yaml machines add --force "$(cat /var/lib/dbus/machine-id)" -a -f /etc/crowdsec/local_api_credentials.yaml`

Is it okay to do this multiple time ?  
Only needed at first install also ???

---

<div class="post-metadata">

**Author:** ![Gandalf](https://dub1.discourse-cdn.com/flex013/user_avatar/discourse.crowdsec.net/gandalf/32/43_2.png) [@Gandalf](https://discourse.crowdsec.net/u/Gandalf)\
**Post date:** [September 20, 2021, 2:48pm UTC](https://discourse.crowdsec.net/t/capi-and-app-console-and-upgrade-v1-1-1-to-v1-2-0/278/12 "2021-09-20T14:48:38Z")

</div>

the console still not shows correct updated informations (version and status)…  
It looks to communicate, the registered ID is unchanged, the online\_api\_credentials.yaml is the same and `cscli capi status` said sucess

---

<div class="post-metadata">

**Author:** ![Gandalf](https://dub1.discourse-cdn.com/flex013/user_avatar/discourse.crowdsec.net/gandalf/32/43_2.png) [@Gandalf](https://discourse.crowdsec.net/u/Gandalf)\
**Post date:** [September 20, 2021, 2:51pm UTC](https://discourse.crowdsec.net/t/capi-and-app-console-and-upgrade-v1-1-1-to-v1-2-0/278/13 "2021-09-20T14:51:08Z")

</div>

banning looks to works :

```auto
root@LPM:~/custom/1.2.0# cscli alerts list
+-----+------------------------------+-----------------------------------+---------+--------------------------------+-----------+--------------------------------+
| ID | VALUE | REASON | COUNTRY | AS | DECISIONS | CREATED AT |
+-----+------------------------------+-----------------------------------+---------+--------------------------------+-----------+--------------------------------+
| 715 | Ip:167.94.138.59 | crowdsecurity/http-bad-user-agent | US | | ban:1 | 2021-09-20 16:37:22.36034268 |
| | | | | | | +0200 +0200 |
| 714 | crowdsec/community-blocklist | update : +559/-0 IPs | | | ban:559 | 2021-09-20 16:11:38 +0200 |
| | | | | | | +0200 |

```

```auto
root@LPM:~/custom/1.2.0# cscli metrics
INFO[20-09-2021 04:53:18 PM] Local Api Metrics:                           
+----------------------+--------+------+
| ROUTE | METHOD | HITS |
+----------------------+--------+------+
| /v1/alerts | GET | 1 |
| /v1/alerts | POST | 1 |
| /v1/decisions/stream | GET | 184 |
| /v1/watchers | POST | 2 |
| /v1/watchers/login | POST | 25 |
+----------------------+--------+------+
INFO[20-09-2021 04:53:18 PM] Local Api Machines Metrics:                  
+--------------------------------------------------+------------+--------+------+
| MACHINE | ROUTE | METHOD | HITS |
+--------------------------------------------------+------------+--------+------+
| 5244e15d7908402192135ac72b4acb10Xd83eOd8jss8u3Cs | /v1/alerts | POST | 1 |
| db3e872e345f48848d0d85ab5c529947GWkbyXJtyNnJziiS | /v1/alerts | GET | 1 |
+--------------------------------------------------+------------+--------+------+
INFO[20-09-2021 04:53:18 PM] Local Api Bouncers Metrics:                  
+------------------------------+----------------------+--------+------+
| BOUNCER | ROUTE | METHOD | HITS |
+------------------------------+----------------------+--------+------+
| cs-firewall-bouncer-yvYwOGfW | /v1/decisions/stream | GET | 184 |
+------------------------------+----------------------+--------+------+

```

servers are looks healthy :

```auto
admin@myNextCloud:~$ cscli metrics
INFO[20-09-2021 04:51:28 PM] Acquisition Metrics:                         
+--------------------------------------------------+------------+--------------+----------------+------------------------+
| SOURCE | LINES READ | LINES PARSED | LINES UNPARSED | LINES POURED TO BUCKET |
+--------------------------------------------------+------------+--------------+----------------+------------------------+
| file:/var/log/apache2/nc-access.log | 311 | 311 | - | - |
| journalctl:journalctl-_SYSTEMD_UNIT=sshd.service | 1 | - | 1 | - |
+--------------------------------------------------+------------+--------------+----------------+------------------------+
INFO[20-09-2021 04:51:28 PM] Parser Metrics:                              
+----------------------------------+------+--------+----------+
| PARSERS | HITS | PARSED | UNPARSED |
+----------------------------------+------+--------+----------+
| child-crowdsecurity/apache2-logs | 311 | 311 | - |
| child-crowdsecurity/http-logs | 933 | 623 | 310 |
| crowdsecurity/apache2-logs | 311 | 311 | - |
| crowdsecurity/dateparse-enrich | 311 | 311 | - |
| crowdsecurity/geoip-enrich | 311 | 311 | - |
| crowdsecurity/http-logs | 311 | 309 | 2 |
| crowdsecurity/non-syslog | 311 | 311 | - |
| crowdsecurity/syslog-logs | 1 | 1 | - |
| crowdsecurity/whitelists | 311 | 311 | - |
+----------------------------------+------+--------+----------+

```

```auto
admin@myREVERSE:~$ cscli metrics
INFO[20-09-2021 04:51:35 PM] Buckets Metrics:                             
+--------------------------------------+---------------+-----------+--------------+--------+---------+
| BUCKET | CURRENT COUNT | OVERFLOWS | INSTANCIATED | POURED | EXPIRED |
+--------------------------------------+---------------+-----------+--------------+--------+---------+
| crowdsecurity/http-bad-user-agent | - | 1 | 1 | 2 | - |
| crowdsecurity/http-crawl-non_statics | - | - | 1 | 2 | 1 |
+--------------------------------------+---------------+-----------+--------------+--------+---------+
INFO[20-09-2021 04:51:35 PM] Acquisition Metrics:                         
+--------------------------------+------------+--------------+----------------+------------------------+
| SOURCE | LINES READ | LINES PARSED | LINES UNPARSED | LINES POURED TO BUCKET |
+--------------------------------+------------+--------------+----------------+------------------------+
| file:/var/log/nginx/access.log | 377 | 364 | 13 | 4 |
+--------------------------------+------------+--------------+----------------+------------------------+
INFO[20-09-2021 04:51:35 PM] Parser Metrics:                              
+--------------------------------+------+--------+----------+
| PARSERS | HITS | PARSED | UNPARSED |
+--------------------------------+------+--------+----------+
| child-crowdsecurity/http-logs | 1092 | 730 | 362 |
| child-crowdsecurity/nginx-logs | 390 | 364 | 26 |
| crowdsecurity/dateparse-enrich | 364 | 364 | - |
| crowdsecurity/geoip-enrich | 364 | 364 | - |
| crowdsecurity/http-logs | 364 | 362 | 2 |
| crowdsecurity/nginx-logs | 377 | 364 | 13 |
| crowdsecurity/non-syslog | 377 | 377 | - |
| crowdsecurity/whitelists | 364 | 364 | - |
+--------------------------------+------+--------+----------+

```

---

<div class="post-metadata">

**Author:** ![Gandalf](https://dub1.discourse-cdn.com/flex013/user_avatar/discourse.crowdsec.net/gandalf/32/43_2.png) [@Gandalf](https://discourse.crowdsec.net/u/Gandalf)\
**Post date:** [September 20, 2021, 2:56pm UTC](https://discourse.crowdsec.net/t/capi-and-app-console-and-upgrade-v1-1-1-to-v1-2-0/278/14 "2021-09-20T14:56:19Z")

</div>

> [@Gandalf](#):
>
> the console still not shows correct updated informations (version and status)…

Okay, must be some time to been reported correctly !  
Now version are fine and the today alerts are also shown…

Sorry for noise…

May be I have done some steps incorrectly, advice welcome ! 😉

---

<div class="post-metadata">

**Author:** ![alteredCoder](https://dub1.discourse-cdn.com/flex013/user_avatar/discourse.crowdsec.net/alteredcoder/32/44_2.png) [@alteredCoder](https://discourse.crowdsec.net/u/alteredCoder)\
**Post date:** [September 20, 2021, 3:20pm UTC](https://discourse.crowdsec.net/t/capi-and-app-console-and-upgrade-v1-1-1-to-v1-2-0/278/15 "2021-09-20T15:20:26Z")

</div>

> `cscli -c /etc/crowdsec/config.yaml machines add --force "$(cat /var/lib/dbus/machine-id)" -a -f /etc/crowdsec/local_api_credentials.yaml`

Yes this should be done at installation and only if your crowdsec agent is installed on the same machine than the local API.

---

<div class="post-metadata">

**Author:** ![Gandalf](https://dub1.discourse-cdn.com/flex013/user_avatar/discourse.crowdsec.net/gandalf/32/43_2.png) [@Gandalf](https://discourse.crowdsec.net/u/Gandalf)\
**Post date:** [September 20, 2021, 4:21pm UTC](https://discourse.crowdsec.net/t/capi-and-app-console-and-upgrade-v1-1-1-to-v1-2-0/278/16 "2021-09-20T16:21:14Z")

</div>

Okay, so I need to study another installation method for the OpenWrt Package.  
More generic usage need to be managed.

I cannot use wizard.sh, because of missing commands, so I need to package them as requirements.  
I can get then a little inspiration from the Debian post/pres remove/install script, look the OpenWrt packaging have some equivalents features.

I can do a simplest installation for now, by simply removing initial setup and let the user customize is CrowdSec for his own use.

---

<div class="post-metadata">

**Author:** ![Gandalf](https://dub1.discourse-cdn.com/flex013/user_avatar/discourse.crowdsec.net/gandalf/32/43_2.png) [@Gandalf](https://discourse.crowdsec.net/u/Gandalf)\
**Post date:** [September 20, 2021, 5:43pm UTC](https://discourse.crowdsec.net/t/capi-and-app-console-and-upgrade-v1-1-1-to-v1-2-0/278/17 "2021-09-20T17:43:36Z")

</div>

requirements for wizard.sh on OpenWrt

install is already available : coreutils-install  
whiptail is also already available  
envsubst is still missing… so I test a package and made a PR:  
envsubst : [envsubst: initial package v1.2.0 by erdoukki · Pull Request #16664 · openwrt/packages · GitHub](https://github.com/openwrt/packages/pull/16664)  
find : find may be tweaked or needed from coreutils

Stay tuned

---

<div class="post-metadata">

**Author:** ![Gandalf](https://dub1.discourse-cdn.com/flex013/user_avatar/discourse.crowdsec.net/gandalf/32/43_2.png) [@Gandalf](https://discourse.crowdsec.net/u/Gandalf)\
**Post date:** [September 21, 2021, 2:10pm UTC](https://discourse.crowdsec.net/t/capi-and-app-console-and-upgrade-v1-1-1-to-v1-2-0/278/18 "2021-09-21T14:10:58Z")

</div>

> [@Gandalf](#):
>
> `cscli -c /etc/crowdsec/config.yaml machines add --force "$(cat /var/lib/dbus/machine-id)" -a -f /etc/crowdsec/local_api_credentials.yaml`

what do you think about this :

```auto
grep -q "login:" /etc/crowdsec/local_api_credentials.yaml
[$? -eq 0] || cscli -c /etc/crowdsec/config.yaml machines add --force "$(cat /var/lib/dbus/machine-id)" -a -f /etc/crowdsec/local_api_credentials.yaml && echo already registered...

```

In case of a first installation, the default /etc/crowdsec/local\_api\_credentials.yaml will not contain login: nor password: strings and values.  
In case of upgrade, because these 2 values will be present, the grep will return 1 and the cscli machines add will not been executed !

I also have to add a test on /var/lib/dbus/machine-id because it is present only since OpenWrt 21.02.x and absent in 19.07.x !  
May be something like this :

```auto
[-f /var/lib/dbus/machine-id] && cscli -c /etc/crowdsec/config.yaml machines add "$(cat /var/lib/dbus/machine-id)" -a -f /etc/crowdsec/local_api_credentials.yaml || cscli -c /etc/crowdsec/config.yaml machines add -a -f /etc/crowdsec/local_api_credentials.yaml

```

May I also remove the --force ?

---

<div class="post-metadata">

**Author:** ![Gandalf](https://dub1.discourse-cdn.com/flex013/user_avatar/discourse.crowdsec.net/gandalf/32/43_2.png) [@Gandalf](https://discourse.crowdsec.net/u/Gandalf)\
**Post date:** [September 21, 2021, 2:20pm UTC](https://discourse.crowdsec.net/t/capi-and-app-console-and-upgrade-v1-1-1-to-v1-2-0/278/19 "2021-09-21T14:20:09Z")

</div>

> [@Gandalf](#):
>
> `[-s /etc/crowdsec/online_api_credentials.yaml] || cscli -c /etc/crowdsec/config.yaml capi register -f /etc/crowdsec/online_api_credentials.yaml`

tweaked to :

```auto
[-s /etc/crowdsec/online_api_credentials.yaml] || cscli -c /etc/crowdsec/config.yaml capi register -f /etc/crowdsec/online_api_credentials.yaml && echo already registered online...

```